Пропитка полов бетонных: Какие бывают пропитки для бетона. Описание и советы по выбору.

УПРОЧНЕНИЕ БЕТОНА — упрочняющая пропитка бетонных полов

Бетон — самый распространенный материал для устройства полов. Однако в процессе эксплуатации бетонного пола выявляется самый страшный его недостаток — пыление.

Как правило, все бетонные полы в той или иной мере пылят, поэтому после укладки бетона необходимо принимать меры для защиты бетонных полов от пылеобразования.

Упрочняющая пропитка бетонных полов

Пропитка бетонного основания упрочняющим составом является самой главной операцией в производстве промышленных полов (промышленные полы с упрочняющей пропиткой).

Упрочняющая пропитка бетона создаёт высокопрочный поверхностный слой, существенно увеличивая твёрдость и износостойкость бетонной поверхности. Нагруженные и высоконагруженные промышленные полы требуют качественной пропитки основания упрочняющими составами.

Упрочнитель бетона Протексил 

К этому типу материалов, эффективно упрочняющих и обеспыливающих бетонный пол, относится проникающий упрочнитель бетона на органической основе Протексил.

Основной особенностью упрочнителя Протексил является то, что пропитка не просто заполняет поры, но, проникая внутрь бетона, вступает в химическую реакцию с частицами цементного камня. Результатом реакции является связывание солей и образование в матрице бетона высокопрочных кристаллических соединений (упрочнение бетона). Пропитка демонстрирует отличное проникновение и сцепление с бетоном, обеспечивая упрочнённую поверхность с высокой твёрдостью.

Упрочнитель бетона Протексил разработан для защиты промышленных полов от воздействия агрессивных сред и повышенных механических и транспортных нагрузок.

Упрочняющая пропитка Протексил оптимально подходит для любых (в том числе низкомарочных бетонов), а также для новых и старых мозаичных полов. Важным моментом является возможность работы с упрочняющей пропиткой при практически любых температурах: зимой и летом, в любых типах помещений.

Упрочнитель бетона Аквастоун

Пропитка для цементных полов Аквастоун представляет собой полимерный упрочнитель бетона на водной основе.

Принцип действия упрочнителя бетона Аквастоун тот же, что и у пропитки Протексил. Глубоко проникая в капиллярно-пористую структуру бетона, пропитка взаимодействует с составляющими цементного камня и образует нерастворимые нитевидные кристаллы, заполняющие поры, капилляры и микротрещины бетона. В результате Аквастоун блокирует поры и микродефекты структуры бетона, что препятствует разрушению бетона и образованию пыли на поверхности (упрочнённые бетонные полы).

Упрочняющая пропитка Аквастоун применяется по бетону, имеющему марку не ниже М200. Не рекомендуется использовать пропитку для железненного бетона или бетона более низких марок.

В этом случае материал не даст желаемого результата.

Немаловажным фактором, отличающим пропитку Аквастоун от импортных аналогов (кстати, зачастую необоснованно дорогих) является относительная дешевизна материала.

Упрочнитель бетона Эпоксол

Эпоксидная пропитка Эпоксол представляет собой двухкомпонентный водный состав на основе эпоксидных смол.

Упрочняющая пропитка Эпоксол наносится на свежий или старый бетон, повышает прочность основания на сжатие в 2-3 раза, увеличивает твёрдость, предотвращает образование трещин. Препятствует агрессивному воздействию воды, горюче-смазочных материалов, растворов солей, кислот и щелочей.

Пропитка пригодна для нанесения на влажный бетон. При нанесении на свежий бетон способствует его лучшему вызреванию, усиливает морозостойкость и коррозийную устойчивость бетона. Используется на цементных основаниях с низкой маркой в комплексе с наливными полами серии Эполаст.

Что дает упрочнение бетона?

Бетонные полы, обработанные упрочняющими пропитками, приобретают следующие свойства:

• увеличение износостойкости;
• водонепроницаемость и влагостойкость;
• обеспыливание поверхности и надёжную защиту от пылеобразования;
• повышение срока службы бетонного пола;
• не требуется особых условий для устройства полов;
• существенно снижается стоимость покрытия.
 

Кроме того, данная технология великолепно подходит для быстрого восстановления старых и изношенных бетонных полов.

В чем преимущество полов с упрочняющей пропиткой?

Промышленные бетонные полы с упрочнённым верхним слоем отличаются повышенной износостойкостью, стойкостью к механическим нагрузкам, ударопрочностью и беспыльностью.

Позвонив или написав нам, Вы всегда сможете получить бесплатные образцы материалов для пробного нанесения и консультации наших специалистов.

Выбор этого типа покрытия позволит значительно ускорить сроки ввода объекта в эксплуатацию, что в условиях современного строительства является одним из главных факторов, влияющих на решение заказчика. Бетонные полы с упрочняющей пропиткой изготавливаются за один рабочий проход. Высокая производительность (от 500 кв.м. в сутки) даёт возможность получить готовую к эксплуатации поверхность пола, по которой можно передвигаться уже через 3 суток.

Где применяются упрочнители бетона?

Упрочнители бетона рекомендуются для бетонных полов складских и торговых помещений, производственных цехов, ангаров, автостоянок, автосервисов, гаражей, предприятий мебельной и деревообрабатывающей промышленности, предприятий машиностроения и станкостроения, предприятий химической промышленности, типографий, медицинских учреждений и т.д.

Упрочняющая пропитка бетонных полов является обязательной для производств пищевой и фармацевтической промышленности, чтобы не допустить контакта цементной пыли с выпускаемой продукцией.

Какую пропитку выбрать?

Упрочнитель бетона Протексил рекомендуется для упрочнения промышленных бетонных полов. Пропитка применяется на бетонах любых марок.

Упрочнитель бетона Аквастоун рекомендуется для упрочнения бытовых бетонных полов и цементно-песчаных стяжек. Пропитка применяется по бетону, имеющему марку не ниже М200.

Упрочнитель бетона Эпоксол рекомендуется для упрочнения промышленных бетонных полов. Пропитка применяется на цементных основаниях с низкой маркой в комплексе с наливными полами серии Эполаст.

90000 Impregnation for concrete floor: overview, characteristics, purpose 90001 90002 When casting reinforced concrete structures stillonly gaining momentum, builders reconciled with the fact that this material is characterized by porosity. Today, the situation has changed, as impregnating compounds appeared on the market of building materials, with the help of which it is possible to significantly improve the technical and operational properties of the products described. 90003 90004 Need for impregnation 90005 90002 Impregnation for concrete floor is aliquid hardener, among the ingredients of which there are adhesives, strengthening the upper layer.The surface of concrete is loose and porous, the structure has many micropores, which leads to two main disadvantages of reinforced concrete products — low hydrophobicity and insufficient strength. 90003 90002 Modern technologies for processing concrete allowTurn the porous surface into a waterproof stone. This is important for the erection of concrete foundations, monolithic walls and load-bearing structures, which are constantly in contact with moisture during operation. Thus, impregnation for the concrete floor allows to protect the surface from negative factors, to increase the strength of the material, to increase wear resistance, to dust off structures, to strengthen old products, to prolong the service life of structures and to improve their appearance.90003 90004 Overview of impregnations with different chemical composition and their purpose 90005 90002 Concrete impregnation can be classified bychemical composition. They are inorganic and organic and are represented by modifiers. Organic impregnations are compounds that are made on the basis of polyurethane, acrylic and epoxy resins. The mixture has a liquid consistency and binds the elements, giving the surface the ability to repel water, and fills the pores, providing resistance to aggressive media.90003 90002 Such impregnations dust the concrete and makethe construction is more solid. Polyurethane impregnation for concrete floor is a universal composition, because it copes with all the tasks that are put before the primer. Choosing the formulations based on other ingredients, you will use highly specialized mixtures. As for inorganic modifiers, they are still known to the consumer as silicate impregnations. The principle of their action is different. The material is not used to fill the micropores, it reacts with external compounds that dissolve and become inert to the reactions.Concrete after processing with inorganic modifiers acquires additional qualities, among them: 90003 90016 90017 dustiness; 90018 90017 strength; 90018 90017 waterproof. 90018 90023 90004 Classification of impregnations for functional purposes: hardening compounds 90005 90002 Strengthening impregnations for the concrete floor usuallyare made on the basis of inorganic compounds — priming silicate compounds. A protective layer does not form on the surface, because the impregnation penetrates and changes the structure of the material.The primer does not exfoliate during operation and ensures the wear resistance of the product with its dedusting. 90003 90002 A reinforcing primer can be applied tosupports, walls, ceilings, floors and other structures. Deep impregnation allows to increase the strength of the layer up to 3 times. Traditional sodium and potassium impregnations are replaced today with lithium silicate hardeners. After treatment of concrete with such a primer, it acquires resistance to moisture and mechanical and erasive effects.Concrete is not exposed to dust. Using lithium impregnation for a deep penetration concrete, you exclude highs on the surface. 2 hours after treatment, the substrate can be operated. 90003 90004 Overview of water-repellent impregnations 90005 90002 Hydrophobizing compounds penetrate into cracks and pores. This treatment protects the surface from penetration of moisture inside and a number of negative factors: 90003 90016 90017 ultraviolet rays; 90018 90017 microorganisms; 90018 90017 the appearance of highs and cracks; 90018 90017 the occurrence of fungi and mold; 90018 90017 salt and acid precipitation.90018 90023 90002 Water-repellent impregnation for concrete of deeppenetration is used for outdoor works, they improve the thermal insulation properties of structures and increase frost resistance. If you use hydrophobic impregnations from the inside, this does not exclude the penetration of groundwater into the foundation, but the problem can be solved by comprehensive measures for waterproofing. These mixtures are presented in a wide range. The most expensive and effective are two-component compounds that are used for the construction of hydraulic structures by the type of basins.90003 90004 Overview of impregnations, their characteristics and purpose: «Protector-primer» 90005 90002 If you decide to use the method of strengtheningconcrete by applying impregnation, then first you need to familiarize yourself with the technical characteristics of the mixture. Considering the reinforcing impregnation for the concrete floor, you should pay attention to the «Protector-primer.» This compound is a one-component primer that is easy to apply, dries quickly and retains vapor permeability.You can buy the mixture for 186 rubles. per kilogram. 90003 90002 The primer is the ideal base for application.protective coating. The base is hardened, it gains adhesion to paintwork materials and provides high quality polymer coating. The application can be carried out on industrial floors, surfaces in residential premises, in car parks, walkways and sidewalks. Before use the structure mixes up. 90003 90002 The film has a uniform matte surface, it should not have extraneous inclusions. Coverage when applied to the surface is 120 g / m 90055 2 90056.It is important to pay attention to the mass fractionnon-volatile substances, it reaches 52%. By viscometer conditional viscosity is 70 seconds. Drying time to the third degree is 1 hour. Upon impact, the strength of the film is equivalent to 40 cm. When bending, the strength reaches 3 mm. 90003 90004 XTREME-HARD Primer Overview 90005 90002 This composition is waterproofing. It is represented by a concentrate and contains silica dust. The material penetrates into the concrete and interacts with its components.The chemical reaction promotes the formation of a crystallization substance; it forms a septum, which will be located in microcracks. Such protection of the concrete floor from moisture is an inorganic composition and interacts after application with cement minerals, creating a coagulation-crystallization mass. This increases the strength of the material and resistance to wear. 90003 90002 Waterproofing is safe for human health andenvironment, because the mixture is non-toxic. It is odorless and colorless, non-flammable, has a low pH value, which improves the strength of the material.This hydrophobic impregnation for concrete does not peel off and does not become crusted, reduces the level of contamination of the coating, provides resistance to mechanical stress and abrasion, as well as ultraviolet. One application will be enough for the entire period of operation. 90003 90004 Coloring mixtures 90005 90002 In order to give concrete a certain color, You can use ordinary paint or color impregnation. The surface will acquire durability and will sustain transfer travel and traffic loads.Painting the concrete floor with a special impregnation ensures that the material penetrates up to 3 mm in depth, thanks to which the coating remains unchanged for a long time, which does not depend on the intensity of the impact of the loads. Additionally, the concrete surface, which is covered with a coloring composition, is treated with a water-repellent protective impregnation. 90003 90004 Impregnation dedusting 90005 90002 Quite often used recentlydedusting impregnation. Impregnation of concrete floors must be considered before their acquisition.As an excellent example is the water-repellent composition «Aquasol», which is made on a water basis. It has water repellency characteristics and is used to protect surfaces and against weathering. 90003 90002 Another option for dust removal is Epoxol. This soil is a two-component composition and is used for hardening and dedusting screeds, magnesia floors, concrete and asphalt surfaces. Drawing is carried out on old or fresh concrete that allows to increase strength of the basis on compression three times.The material acquires a higher hardness, which eliminates the formation of new cracks. 90003 90002 If you want to equip the right concretethe floor, it can be covered with this mixture, and the base at this moment may even be wet. Impregnation can be used in industrial, public and warehouse premises, as well as at enterprises of the pharmaceutical and food industry. 90003 90004 Concrete protection by painting 90005 90002 Painting of the concrete floor can be done withusing the material «Unikom», which is a moisture-resistant alkyd composition for interior use.You can use the mixture when applied to the facade. The material is wear-resistant, provides surface protection and eliminates its destruction. Operation can be carried out at a wide range of temperatures ranging from -60 to + 60 ° C. 90003 90002 This alkyd compound isone-component enamel — a suspension of pigments, special additives and functional fillers. The paint has a special purpose and protects the concrete from the effects of loads, has a high hiding power and resistance to water, 90003.90000 90001 Hardened concrete flooring 90002 90003 90004 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 Mineral hardener for concrete industrial DST (dry shake topping) floors, CT-C50-F7-A9 90017 90018 Provides a hard wearing surface for use in warehouses, garages, workshops and sidewalks, driveways and car parks. 90010 90009 Dosage 4 kg / m 90021 2 90022 .read more 90010 90009 90010 90009 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 Semi-metallic hardener for concrete industrial floors with better abrasion resistance, CT-C50-F10-A3 90018 90017 provides a hard wearing surface for use in factories, warehouses, workshops etc.90017 Dosage 4 kg / m 90021 2 90022. 90010 90009 90010 90009 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 Metallic hardener for concrete industrial floors with high abrasion resistanc, CT-C60-F10-A1,5 90018 90017 provides a hard wearing surface for use in factories, warehouses (intensive traffic) and explosive condititions areas.90017 Dosage 4 kg / m 90021 2 90022. 90010 90009 90010 90009 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 Ultrametallic hardener for concrete industrial floors with highest abrasion resistanc, CT-C60-F10-A1,5 90018 90017 provides a hard wearing surface for use in extreme service conditions (steel plants, power stations etc.) And explosive condititions areas. 90017 Dosage 7 kg / m 90021 2 90022. 90010 90009 90010 90009 90010 90005 90006 90003 90004 90005 90033 90005 90006 90003 90008 90009 90010 90009 90010 90009 90010 90005 90014 90009 90016 BAUSEAL® EKO, Waterbased sealer for concrete floors 90018 90017 Ready-to-use water dispersion of acrylic resin, which impregnates concrete surface while sealing and hardening it.BAUSEAL EKO does not degrade and it creates a permanent bonding with the concrete matrix. To be used on surface-hardened concrete floors, floated BAUFLOOR floors and decorative wall layers to strengthen their surface, decrease absorbency and protect from dusting. 90010 90009 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 BAUSEAL® ENDURO, Solvent based sealer for concrete floors 90018 90017 To be used on new surface hardened concrete floors, Baufloor floors in trowelled technology as protection from losing water too quickly.For surface impregnation, decreasing absorbency and making it easier to keep the floor clean. To be used on existing surface-hardened concrete floors to strengthen their surface, decrease absorbency and protect from dusting. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90177 90178 90009 90010 90005 90014 90009 90016 NANOSEAL®, Lithium and polymer based agent for the curing, strengthening and sealing of concrete surfaces 90018 90010 90009 The agent based on lithium silicate deeply penetrates the surface of concrete and by entering into reaction with free calcium hydroxide creates a hard, resistant, tight and coherent structure.To be used on old and newly-made concrete floors in warehouses, production halls, food and pharmaceutical production plants, com-mercial and religious facilities. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90177 90017 90178 90009 90010 90005 90014 90009 90016 NANOCOAT®, Silicate and polymer based polishing agent for concrete floors 90018 90010 90009 Advanced formula based on lithium silicate and modified copolymers to be used on concrete surfaces and thin-layer cement floors.To be used on old and newly-made concrete floors in warehouses, production halls, food and pharmaceutical production plants, com-mercial and religious facilities. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90177 90017 90178 90009 90010 90005 90014 90009 90016 BAUTECH FORMULA, silicate and polymer based agent for curing, strengthening and sealing of concrete surfaces 90018 90010 90009 Waterbased solution of silicates of selected alkali metals that chemically modifies surface of concrete floors.To be used on old and newly-made concrete floors in warehouses, production halls, food and pharmaceutical production plants. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90253 90009 90010 90009 90010 90005 90014 90009 90016 BAUPOX® GP, colourless, deeply-penetrating epoxy agent for con-crete surfaces 90018 90010 90009 Two-component, colourless, deeply-penetrating agent on the basis of epoxy resins.Strengthening and sealing of concrete foundations and cement screeds. As an anti-dusting agent for industrial floors subject to intensive activity of external factors. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90017 90009 90010 90005 90014 90009 90016 TERRAFILL® (0,5 mm — 3 mm), two-component solution for repair of concrete surfaces, cement screeds and polished floors 90018 90010 90009 Preparation for the repair of concrete floors and cement screeds, of high mechanical resistance, flexibility and perfect adhesion to the foundation.Very long open time (up to several hours). Very short setting time in layers of up to 3 mm (20 min.). 90010 90009 read more 90010 90005 90006 90003 90004 90005 90006 90003 90008 90009 90010 90009 90016 90017 90018 90010 90005 90014 90009 90016 BAUMEX® polymer reinforcing fiber 90018 90017 Extremely stong and flexible synthetic polymer fibres. They can both replace steel mesh or steel fiber reinforcement, as well as make auxiliary reinforcement of concrete slab, wall, etc.90017 Dosage from 1,5 kg of fiber per 1 m 90021 3 90022 of concrete. 90010 90009 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90016 60 90018 90010 90009 90016 90017 90018 90010 90005 90014 90009 90016 BAUMIX® 60 steel reinforcing fibres 90018 90017 Steel fibres for industrial floors and pavement reinforcement. Eliminates traditional mesh reinforcement and increases durability of concrete.90017 Dosage: from 15 kg per cu.m. of concrete. 90010 90009 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90016 50 90018 90010 90009 90010 90005 90014 90009 90016 BAUMIX® 50 steel reinforcing fibres for concrete 90018 90017 Steel fibres for industrial floors and pavement reinforcement. Eliminates traditional mesh reinforcement and increases durability of concrete.90017 Dosage: from 15 kg per cu.m. of concrete. 90010 90009 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90009 90010 90009 90010 90005 90014 90009 90016 BAUCON® Polypropylene fibres 90018 90017 Polypropylene fibres reduces concrete shrinkage while improving the toughness of the substrate. 90017 Dosage: 0,6 kg per cu.m. of concrete. 90010 90009 90010 90009 read more 90010 90005 90006 90003 90004 90005 90006 90003 90008 90016 25 90017 90018 90005 90014 90009 90016 BAUFLEX® 25 Two component, flexible high performance sealant for internal and external flooring 90018 90017 Polyurethane based, dyed, flexible sealant, with high mechanical resistance.Indoor and outdoor applications: for warehouses, production areas, pedestrian and traffic areas when leakproofing is required. Well suited to surfaces in food industry and surfaces exposed to weather and temperature differences. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90016 35 90017 90018 90005 90033 90009 90016 BAUFLEX® 35 1-component high performance sealant for flooring 90018 90017 Used to fill contraction and expansion joints in floors.Indoor and outdoor applications — for warehouses, production areas, pedestrian and traffic areas. Recommended for food industry and surfaces exposed to weather and temperature differences. Range of colours. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90016 65 90017 90018 90005 90033 90009 90016 BAUFLEX® 65 Two component, high performance sealant for flooring 90018 90017 Polyurethane based, dyed, high performance sealant for internal flooring.Used to fill contraction and expansion joints in floors. Indoor applications — for warehouses, production areas, traffic areas etc. Recommended for food industry. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90017 90016 PRIMER 90017 90018 90005 90014 90009 90016 BAUFLEX® PRIMER for sealants 90018 90017 Ready to use polyurethane primer for joint sealants.Used to obtain a proper bond of sealant to the concrete joints. Increases sealants adhesion to concrete 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90017 90005 90014 90009 90016 BAUCORD® Joint filler cord 90018 90017 Flexible and chemically resistant material made of polyethylene foam. Ensures proper formation of space within the joints in external and internal concrete floors before filling with BAUFLEX joint sealant.Ensures proper distribution of forces within the expansion joints, in a perpendicular direction to the joint, ensuring its correct work. 90010 90009 read more 90010 90005 90006 90003 90004 90005 90033 90034 90005 90006 90003 90008 90017 90005 90014 90009 90016 BAUFIX® Filling insert 90018 90017 Made of specially selected PVC of proper flexibility and colours matching the surface. Used for temporary or final filling of expansion and contraction joints in concrete floors and Terrafloor® decorative polished screeds.90010 90009 90010 90009 read more 90010 90005 90006 90545.90000 Dedusting impregnation for concrete. Types and methods of application 90001 90002 Concrete can be given certain qualitativecharacteristics not only at the stage of preparation and pouring, but also at the stage of operation. With the help of special impregnations that penetrate the surface layer to a depth of 5 mm, it is possible to dust and harden the structure, which will receive the qualities of invulnerability and non-adherence to the influence of aggressive factors. 90003 90004 Types of impregnations in composition 90005 90002 Dedusting impregnation for concrete can beorganic or inorganic.In the first case it is a question of liquid compositions which are made on the basis of acrylic, polyurethane and epoxy resins. The principle of action of such mixtures is based on filling the pores with a binding element. This ensures dedusting, reducing the ability to absorb moisture and inertness with respect to chemical solutions. Organic impregnations can bond the surface layer, making it more durable. This group includes polyurethane impregnations, which are more or less universal. All the others cope with a narrow range of tasks.90003 90002 On sale there is sometimes also inorganicDedusting impregnation for concrete. Such mixtures do not fill the pores, transforming soluble molecular compounds into insoluble. Concrete after such treatment acquires new properties, among them one can distinguish: 90003 90010 90011 dedusting; 90012 90011 water resistance; 90012 90011 strength. 90012 90017 90004 Varieties of impregnation as intended 90005 90002 Most impregnations for concrete performa rather narrow circle of tasks, few universal among them.For this reason, the material is divided according to purpose: it can act as a hardener, dust remover and water repellent. In a separate group, you can select colored impregnation. Hardening substances in most cases are inorganic, they give concrete the quality of resistance to mechanical loads. Such compositions have deep penetration and are made on the basis of sodium and potassium compounds, which strengthen the concrete to a depth of 3.5 mm. This is quite enough, but there are situations where a deeper impact is required.Comes to the aid of a new development, which is represented by lithium impregnation. It penetrates to a depth of 5 mm. As a result, it is possible to remove dust from the surface, which will be protected from the onset of efflorescence. After this treatment, the floor will be ready for operation in only 2 hours. 90003 90002 Dedusting impregnation for concrete most oftenused in areas where the floor is subjected to high loads and remains open. Quite often, such solutions are used even to protect outdoor street areas.The wide range of use of this modifier is due to its impact. In addition to dust removal, the tool increases wear resistance and durability, protecting the floor from destruction and the effects of precipitation, as well as chemical elements and fuels and lubricants. That is why for processing the concrete floor in the garage is better than such impregnation, you can not think of anything. 90003 90002 The waterproofing dedusting impregnation forconcrete gives the surface a water repellent. After applying the mixture, the pores and microcracks are filled, the result is the surface, which can easily transfer moisture and water.Cracks and efflorescence will not appear anymore during operation, the concrete will be protected from salt, acid precipitation, ultraviolet radiation, as well as moldy fungi and microorganisms. This type of impregnation is called universal, but if such a set of qualities of concrete is not required, it is better to purchase a specialized composition that will be cheaper and will cope with the tasks assigned to it perfectly. 90003 90004 Is it possible to paint concrete with ordinary paint 90005 90002 Impregnation for concrete dedusting can alsopaint the surface.If you put on the base of the usual paint, then it will last quite long. It is better to give preference to color impregnations, which penetrate 3 mm. They extend the life of the structure, dedusting and water-repellent. 90003 90004 Application methods 90005 90002 Impregnation for concrete can remove dustspray gun, roller or brush. In order to rid the layer of impregnation from air bubbles, it is treated with an aeration roller, moving along the surface in special shoes with spikes. It is important to observe the conditions under which the thermometer should not fall below 0 ° C.It is important to eliminate the formation of a varnish film on the surface of the concrete. 90003 90004 Reviews of hardening impregnation «Aquastone» 90005 90002 This composition, in the opinion of buyers, strengthensconcrete structures in half. Mix can be used for old and new concrete surfaces, even those that have a low brand. Aquastone is also chosen by consumers for the reason that it is odorless, and is also characterized by high penetrating power. After drying, the surface is not only dedusted, but also acquires a water-repellent layer.It is possible to apply mix even on newly-laid concrete. The material is environmentally friendly, as it is made of water-based. According to consumers, Aquastone is easy to apply and versatile. 90003 90004 Features of drawing «Aquastone» 90005 90002 The above dedusting impregnation of concrete, the price of which is 227 rubles. for 1 kg, after complete drying should be sanded, this will ensure good adhesion of the surface with a finishing coating, if that will fit. When mixing cement mixes, it is allowed to replace part of the water with the Aquastone material, which can be added in the amount of 50%.In this case, the surface of the floor does not require further processing. Before applying covering layers on the basis of polymeric materials, the surface should be treated with a primer. 90003 90004 Features of application of dust-removing compositions 90005 90002 Experts say that there may beself-made dusting of the concrete floor was made; you can find tips on applying the mixture below. Most formulations are applied to concrete, which is left for two weeks after pouring. Once the surface is strong, you can begin the application of impregnation.Work should be carried out at a temperature range from +5 to +40 ° C, if the thermometer has dropped below or has risen above the recommended values, the impregnation properties may deteriorate, as well as the quality of the treated concrete. 90003 90002 Dedusting impregnation for concrete types and methodsthe use of which were described in the article should be applied after surface preparation. It is necessary to get rid of potholes, minor defects and shallow cracks by the method of dry grinding.Impregnation can strengthen the structure at the molecular level, but will not be able to cope with defects. Before starting work, any surface should be cleaned from dust and dirt. 90003 90004 Conclusion 90005 90002 Dedusting impregnation for concrete, the types of whichdescribed above, can be used by you to strengthen the structure, which will last much longer after processing. In order not to overpay, it is important to choose the right composition before starting work. 90003 p >> .90000 Concrete Flooring Options & Designs 90001 90002 Concrete floors offer numerous options in design, color and texture. Click on the videos below to get advice from Bob Harris on the design styles available for concrete flooring, including details of which styles are most conducive for various environments. 90003 90002 90005 Stained Concrete Floors-Ideas for Concrete Stains 90006 90003 90002 Time: 1:54 90003 90002 Bob Harris introduces you to the myriad ways you can dress up your concrete floors with chemical stains and dyes.Stains and dyes can be applied to new or old and plain or colored concrete, in both residential and commercial settings. They are popular in kitchens, family rooms, retail stores, restaurants, sports stadiums and even for garage and basement floors. With both stains and dyes, the color becomes a permanent part of the concrete and will not wear away or require reapplication. 90003 90002 For more information see: 90013 Staining Concrete 90013 Concrete Dyes Expand the Color Palette of Concrete Stains 90003 90002 Images used in video provided by Colormaker Floors, Progressive Concrete Coatings, Kemiko Decorative & Industrial Floor Finishes, & Bomanite.90003 90002 90005 Staining Concrete Offers Design Versatility 90006 90003 90002 Time: 2:29 90003 90002 Harris explains his tools and techniques for achieving special effects with stains and dyes and the various ways you can personalize your floor. Because stains accent the natural characteristics of concrete, they result in an organic look with a rich patina. The warm, variegated coloring effects blend particularly well with Old World or Tuscan-style decor. 90003 90002 For more information, read What Special Effects Are Possible with Concrete Stains? 90003 90002 Images in this video provided by Westcoat, Flying Turtle Cast Concrete, Colormaker Floors, Kemikoating Surfaces, & Modello Designs.90003 90002 90005 Limitations of Concrete Acid Stains 90006 90003 90002 Time: 2:58 90003 90002 Many people love the natural color variations produced by acid-based chemical stains, but they do have some limitations, such as a limited palette of earth-toned colors and unpredictable coloring effects. Harris discusses how to overcome some of these limitations by pairing chemical stains with dyes or by using water-based stains. Using concrete dyes or water-based stains allows you to tap into a broader range of colors.Dyes can also be used to fix problem areas where chemical stains have not taken. 90003 90002 For more information see: 90013 Water-Based Penetrating Stains 90003 90002 Images in this video provided by Concretizen & L.M. Scofield. 90003 90002 90005 Using Concrete Stain with Overlays 90006 90003 90002 Time: 3:04 90003 90002 Because stains and dyes have some transparency and are not entirely opaque, they will not be able to mask flaws in an existing concrete floor, such as heavy rust or oil stains and plumbin 90003.